Wansview NCH--530W Manuel d'utilisateur télécharger pdf (Page 15)

http://www.wansview.com

to the domain name with colon. Example:

http://mydomain.dyndns.org:81.

3.4. Alarm setting

3.4.1. External Alarm Input

Figure 16

The camera should have external alarm input port for enable this functions. Connect external alarm

detector to the input port, the detector will output switching signal when it detects any abnormal, input

port of the camera will detect the level change, so it will detect the alarm, therefore the detector should

be switching sensor (same as switch)

3.4.2. Motion Detection Setting

Figure 17

Please click “apply” after settings are done, and motion detection takes effect. The higher value, the

higher sensitivity. The camera will trigger corresponding alarm when the detection area occur any

change.

3.4.3. Alarm mode setting

After camera triggers the alarm, it will store the capture pictures and videos according to your setting

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Pas de commentaire

Wansview NCH--530W Manuel d'utilisateur Page 15